8
Integrated Flickerfree Color Video Assist for Arriflex 16SR and 16SR HS
Reg 16 or Super 16 Format
This flickerfree CCD video assist is designed to produce a flickerfree image for camera speeds ranging from
10 to 150 fps. A Sony CCD image sensor provides it with high resolution, high sensitivity, and outstanding
color fidelity. The power necessary to supply the unit is taken internally from the camera's 4 pin XLR power
input receptacle. This integrated video assist system provides a picture on the monitor screen that is brighter
and sharper than that of the T-bar or modified J-bar video tap because the CCD image sensor is installed
closer to the fiber optic viewing screen. The viewfinder image is also brighter because the exposure meter's
beamsplitter is removed and replaced by a brighter pellicle T70/R30 type beamsplitter. The video optics is
independent of the viewfinder, so the video image is stable even when the viewfinder is rotating. This
installation requires that the entire exposure meter section be removed from the camera body. This video
assist is equipped with a noise filter which provides a clear monitor image even if the camera motor is noisy.
The low power consumption, only 2.7W (220mA), gives your camera battery a longer life.
Specifications:
• Signal system: NTSC or PAL
• Picture elements: NTSC- 768(H) x 494(V), PAL-752(H) x 582(V)
• Scanning system: NTSC - 525 lines, PAL - 625 lines, 2:1 interlace
• Sync system: Internal
• Horizontal resolution: 470 TV lines
• Mode: Color or B&W
• Flicker reduction: 100% for speeds from 10fps to 150fps
• Min. illumination: 1.5 Lux, F1.2, AGC:ON
• White balance: AWB(auto), 3200K and 5600K
• Gain Control: 0dB, 4dB, AGC
• Video output (BNC connector): Composite 1.0 V p-p, 75 ohm
• Power requirement: 12 V DC (taken internally from the camera's battery)
• Power consumption: 2.7 W, 220mA/12V
• Operating temperature -5 to +113°F (-20 to +45°C)
• Body: Black extruded aluminum
• • Size: 4.8" x 2.75" x 0.75" (122mm x 70mm x 19mm)
Power on/off switch (3 position):
- Lower: the video assist is ON in black and white mode (B&W) and the red LED is lit.
- Middle: power is OFF and the red LED is not lit.
- Upper: the video assist is ON in color mode and the red LED is lit.
Gain control switch (3 position):
- Lower: gain control is set to 4dB.
- Middle: gain control is set to 0dB.
- Upper: auto gain control (AGC) is ON.
(36 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern