14
5 AGC (auto gain control) ON/OFF switch.
- ON: Auto gain control
- OFF: 0 dB
6 Y/C / VBS switch (to use this option you need a special cable).
- V/C: Select this position to output the Y/C separated signal.
- VBS: Select this position to output the VBS composite signal.
- R control for manual white balance adjustment.
This control is effective when the WHITE BALANCE switches are set to MAN. Adjust the red color by turning
the control.
- B control for manual white balance adjustment.
This control is effective when the WHITE BALANCE switches are set to MAN. Adjust the blue color by turning
the control.
Video Assist for the Arriflex 16BL
For the Arriflex 16BL, we have both a B&W and a color CCD video assist. It is installed inside the camera
door and allows you to look through the viewfinder and display the picture from the video assist on a monitor
at the same time. For the APEX door with exposure meter, we will remove the meter section from the door
before the video assist installation. This unit has an on/off power switch, AGC/CCD auto iris switch and a BNC
video output connector. For the installation, you have to send us just the camera door. It is easy to remove
the door from the body. You have to open the door, remove the 4 screws, and slide the door off from the
hinge.
Specifications for the color unit:
• SONY CCD image sensor
• Picture elements: NTSC 768(H) x 494(V), PAL
752(H) x 582(V)
• Scanning system: 2:1 Interlace
• Horizontal resolution: 470 TV lines
• Video output: 1.0V p-p composite video at 75 ohm
• BNC video output connector
• Min. illumination: 0.8 Lux, F1.2 AGC: ON
• Auto white balance (AWB)
• AGC/CCD IRIS control switch: 3 position switch
which controls the CCD IRIS and AGC on/off
- Lower: AGC control is OFF (0dB) and CCD IRIS
control is OFF.
- Middle: AGC control (max 14dB) is ON and CCD
IRIS control is OFF. Use this setting when the monitor image is underexposed (low light level).
- Upper: AGC control is OFF (0dB) and CCD IRIS control is ON; automatic exposure control of the CCD
image sensor is activated. Use this setting when the monitor image is overexposed.
• LED power indicator
• Power on/off switch: when in upper position, the video power is ON and the red LED is lit; when in lower
position, the video power is OFF and the red LED is not lit
• Power requirement: 12V DC
• Power consumption: 2.4W (200mA)
• Operating temperature -5 to +113°F (-20 to +45°C)
(36 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern